Surface-Mount Outdoor Access Keypad

Log in for pricing

Write a Review
Calculated at Checkout

Product Description

Surface-Mount Outdoor Access Keypad
  • 110 Users (Output #1: 100 users, Output #2: 10 users)
  • 2 Outputs
    • Output #1 - Form C relay 5A@28VDC
    • Output #2 - Form C relay, 1A@28VDC
  • Each relay can be programmed for momentary (1~999 seconds) or latch
  • Programmable LED keys: Full-time ON, ON when keys are pressed, Full-time OFF; suitable for solar applications
  • Code flxibility: each code can be 4~8 digits long
  • Egress input for exiting the protected primeses
  • Backlit keys for easy nighttime use
  • Dual voltage: 12-24 VAC/VDC operation
  • Tamper switch: N.C. dry contact 3A@12VDC
  • Mantrap: for a protected area with two doors, this feature allows only one door to be open at any time
  • All features are programmed directly from the keypad
  • Duress output signals a silent alarm if an authorized user is forced to open the door under duress
  • Keypad active output
  • Door-forced-open and door-propped-open alarm output
  • Keypad can be programmed to emit beeps for key presses or operate in silent mode
  • Auto or manual code entry checking:
    • Auto: # Key is not required after each code
    • Manual: # Key must be pressed after every code


Operating Voltage:12~24VAC/VDC
Current Draw:Stand=-by15mA@12VDC
Key pressed45mA@12VDC
Relay active130mA@12VDC
Number of relays:2
Relay output:Relay #15A@28VDC, Form C, NO/NC/COM
Relay #21A@28VDC, Form C, NO/NC/COM
Additional output:
Keypad active and alarm output
Egress:N.O. ground, 3A@12VDC
Door sensor input:N.C.